5英寸TFT液晶顯示屏 480P
General Deion
FRD050FW25Bl is a transmissive type a-Si TFT-LCD (amorphous silicon thin film
transistor liquid crystal display) module, which is composed of a TFT-LCD panel, a driver circuit a backlight unit, The panel size is 5 inch and the resolution is 480x854. High image quality a-Si TFT LCD module. Partial-screen display function is available. Sleep and Stand-by modes are available for power saving.
Precautions
Please pay attentions to the followings as using the LCD module.
Handling
(a) Do not apply strong mechanical stress like drop, shock or any force to LCD
module. It may cause improper operation, even damage.
(b) Because the polarizer is very fragile and easy to be damaged, do not hit, press or
rub the display surface with hard materials.
(c) Do not put heavy or hard material on the display surface, and do not stack LCD
modules.
(d) If the display surface is dirty, please wipe the surface softly with cotton swab or
clean cloth.
(e) Avoid using Ketone type materials (e.g. Acetone), Toluene, Ethyl acid or Methyl
chloride to clean the display surface. It might damage the touch panel surface
permanently. The recommended solvents are water and Isopropyl alcohol.
(f) Wipe off water droplets or oil immediately.
(g) Protect the LCD module from ESD. It will damage the LSI and the electronic
circuit.
(h) Do not touch the output pins directly with bare hands.
(i) Do not disassemble the LCD module.
(j) Do not lift the FPC of Touch Panel.
Storage
(a) Do not leave the LCD modules in high temperature, especially in high humidity
for a long time.
(b) Do not expose the LCD modules to sunlight directly.
(c) The liquid crystal is deteriorated by ultraviolet. Do not leave it in strong
ultraviolet ray for a long time.
(d) Avoid condensation of water. It may cause improper operation.
(e) Please stack only up to the number stated on carton box for storage and
transportation. Excessive weight will cause deformation and damage of carton
box.
Operation
(a) When mounting or dismounting the LCD modules, turn the power off.
(b) Protect the LCD modules from electric shock.
(c) The Driver IC control algorithms stated above should always obeyed to avoid
damaging the LSI and electronic circuit.
(d) Be careful to avoid mixing up the polarity of power supply for backlight.
(e) Absolute maximum rating specified above has to be always kept in any case.
Exceeding it may cause non-recoverable damage of electronic components or,
nevertheless, burning.
(f) When a static image is displayed for a long time, remnant image is likely to occur.
(g) Be sure to avoid bending the FPC to an acute shape, it might break FPC.
(h) Most of the touch screens have air vent to equalize the inside air pressure to the
outside one. The air vent must be open and liquid contact must be avoided as the
liquid may be absorbed if the liquid is accumulated near the air vent.
(i) For the fragility of ITO film, it should avoid to use too tapering pen as the input
material.
Touch Panel Mounting Notes
(a) If a cushion is used between bezel/housing and film must be choose as free as
enough to absorb the expansion and contraction to avoid the distortion of film.
(b) The cushion must be placed out of the Viewing Area.
(c) Bezel/Housing edge must be posited between Key Area and Viewing Area. The
edge enters the Key Area may cause unexpected input if the gap is too narrow or
foreign particles like dusts exist between Bezel/Housing and ITO film.
Others
a) If the liquid crystal leaks from the panel, it should be kept away from the eyes or
mouth.
b) For the fragility of polarizer, it is recommended to attach a transparent protective
plate over the display surface.
c) It is recommended to peel off the protection film on the polarizer slowly so that
the electrostatic charge can be minimized.
undefined

    深圳市阿美林電子科技有限公司成立于2009年，是一家專業從事TFT液晶顯示屏（LCM）設計開發和制造的**企業。
    公司具有完善的質量管理體系，2010年通過了ISO9001：2008質量體系認證，產品通過了CE、FCC、ROHS、EMC等專業認證；強大的LCM設計開發、制造及品質管控團隊，成套COG邦定機、COB邦定機、SMT貼片機、HEATSEAL熱壓機等**設備，為準確及時向客戶交貨提供了有力的**。
    產品廣泛應用于：儀器儀表、工業控制器、通訊設備、醫療儀器、金融機具、GPS導航調度、POS機終端和辦公自動化設備、文本信息機、電力自動化、監控、教學設備以及美容儀器、小家電、智能家居、智能水電氣熱表等領域的顯示終端。
    公司位于產業密集、交通便利的深圳市光明新區，采用全新的工業標準廠房，公司擁有一批專業的管理、技術、營銷精英，是一家集研發、生產、銷售于一體的專業液晶模組產品高新企業。公司秉承“**品質，攜手共鞏”的經營理念，利用高新科技結合社會發展趨勢，不斷推陳出新。我們將以嚴格的生產工藝、科學的質量管理、完善的測試手段，以誠信、踏實、高質、優良的服務理念面向社會，報答社會?！捌焚|(zhì)至上，服務并重”是我們的宗旨，“以客戶為中心，以市場為*，以創新為**競爭力”是我們的方針。公司一貫堅持對新產品的不斷開發，對新技術的不斷投入，對人才的不斷培養，對服務的不斷改善，擁有完善的售后服務體系。我們將再接再歷，與全國各地方案商、終端客戶攜手合作，共創雙贏局面，邁向較輝煌的明天。