河北新華包裝機械有限公司產品配置
Hebei xinhua packing machinery CO.,LTD
Production parameter
ZJ400—(2400)型中速全自動水墨印刷開槽機功能配置及參數標準
ZJ400-2400 type middle automatic ink printing and slotting parameter
一、 前緣送紙部:
I.front feeding paper part
1、 進紙前緣定位,變頻調整進紙速度。
1, Feed the leading edge positioning, frequency adjust the feed rate.
2、 可調整風量,增加薄紙板及曲翹紙板傳送穩當性、準確性。
2. Adjustable air flow, increase warped cardboard and thin cardboard secure transmission, accuracy
3、 左右側擋板,導向機構,位移平穩、**。
3. Right and left side covers, a guide mechanism, the smooth displacement accuracy.
4、 離合、氣動鎖緊,***。
4. Clutch, pneumatic locking, safe and reliable.
5、 上送紙輥為無縫鋼管,包裹**橡膠,并做平衡校正。
5.The feed roller is seamless wear rubber wrapped and do balance correction.
6、 下送紙輥為無縫鋼管,壓花鍍硬鉻,平衡校正。
6.Lower feed roller is seamless embossed hard chrome plating, balance correction.
7、 送紙輥間隙刻度盤蝸輪蝸桿調整,調整范圍0-12mm,采用十字滑塊機構,調整時傳動齒輪永遠**正確嚙合狀態。
7.Feed roll gap adjustment dial worm adjustment range 0-12mm, the use of cross-slider mechanism, when adjusted to ensure the correct transmission gear is always engaged state.
8、電腦調整裝置
puter adjustment device
1)、送紙部電腦觸摸屏式人機界面調整。
1).Feed computer touch-screen human-machine interface adjustments.
二、印刷部
II.printing part
1、印刷輥
1.printing roller
1)、鋼板材質,表面研磨,鍍硬鉻。Steel material, surface grinding, hard chrome plating.
2)、平衡校正,運轉平穩。Balance correction, smooth operation.
3)、采用荊刺式掛版,方便快捷,減少印刷試印和廢品率Type using thorns hanging version, convenient, reduce printing test print and scrap
2、印刷壓輥printing press roller
1)、鋼管表面研磨,鍍硬鉻。Steel surface grinding, hard chrome plating.
2)、平衡校正,運轉平穩。Balance correction, smooth operation.
3)、印刷壓輥與印刷輥間輥刻度盤顯示,手動調整,調整范圍0-12mm,采用搖板機構,調整時傳動齒輪永遠**正確嚙齒狀態。Between the printing press roller and the printing roll dial display, manual adjustment, the adjustment range 0-12mm, using rocker panels institutions, adjust the transmission gear is always to ensure the correct rodents state.
1)、鋼管表面采用**的電鍍硬鉻工藝、堅硬、平滑、**。Steel surface using advanced hard chrome plating process, hard, smooth, wear-resistant.
3)、配合送紙氣動升降網輥,防止印版重復著墨以及短時停機時,網輥穴中油墨干涸。When feeder with pneumatic lift net roller to prevent duplication inked plate and short downtime, network roll hole in the ink dry.
4、橡膠輥(選用80%天然橡膠經高溫精制而成,產地冀州)Rubber roller (optional 80% natural rubber high temperature refining, origin dongguang)
1)、無縫鋼管表面包裹**橡膠,經平衡校正。Seamless steel surface wear rubber wrapped by balance correction.
2)、橡膠輥中高特殊研磨,傳墨效果好。High special rubber roller grinding, good ink transfer effect.
3)、膠輥設有過載裝置,可大大延長膠輥的使用壽命。Cots with overload device, can significantly extend the life of rubber roller.
5、送紙上、下輥upper and lower feeding paper roller
1)、上輥:配有左右可調送紙輪。Upper roller:with left and right adjustable feed roller
2)、下輥:無縫鋼管,表面研磨,鍍硬鉻。Lower roller :seamless, surface grinding, hard chrome plating.
3)、上下送紙輥間隙刻度盤顯示,蝸輪蝸桿調整,調整范圍0-12mm,采用搖板連接,調整時傳動齒輪永遠**正確中心距齒合。Gap between the upper and lower feed rollers dial display, worm adjustment, the adjustment range 0-12mm, using the rocker panels connected, always adjusting the transmission gear teeth together to ensure the correct center distance.
5)網紋輥 Anilox roller
1)采用厚壁無縫鋼管,經平衡校正,表面研磨,精壓
標識目數為,1組200 ,2組220,3組240,4組240
Thick-walled seamless steel pipe, through balance correction, surface grinding, coining
Identifies the mesh is, a group of 200, two groups 220,3 240,4 group 240 group
6、相位調整機構Phase adjustment
1)、差動行星式齒輪機構
2)、印刷相位采用微控及電動數字式360°調整(機器運轉、停止均可調整)
3)、橫向位置,手輪調整。
7、油墨循環
1)、采用氣動隔膜泵上墨,供墨穩定,操作保養簡單。
2)、油墨濾網,過濾雜質。
3)、設有自動勻墨裝置,可實現停機不停墨功能,防止停機時油墨干結。
4)、儲墨杯以防油墨飛濺和排氣。
5)、自動循環清洗和自動上墨。
1), the differential planetary gear mechanism
2), the printing phase micro controller and electric digital 360° adjustment (the machine is running, stop can be adjusted)
3), the lateral position of the hand wheel adjustment.
7, ink circulation
1), the use of pneumatic diaphragm pumps ink, ink stability, operation and maintenance simple.
2), the ink filter, filter impurities.
3), with automatic inking unit, the ink can be realized down stop function to prevent the shutdown of the ink dry.
4), the ink reservoir cup to prevent ink splashes and exhaust.
5), the automatic cleaning cycle and automatic ink.
1、手動調整開槽四刀座橫移,移動快捷方便。
2、同步手動調整開槽前刀與后刀尺寸(箱高)。
3、同步手動橫移,上開槽刀,下開槽刀,剃紙刀和上下壓線輪。
4、合金鋼材質經熱處理研磨齒形開槽刀,寬度為5-7毫米。
5、合金鋼材質經熱處理研磨修邊刀,刀口鋒利,**度高。
III.the slot portion
1, manually adjust the slotted four knife sliding, moving quickly and easily.
2, synchronized manually adjust the knife and the knife before slotting size (box height).
3, the synchronization manually traverse, the slotted knife, under the slotted knife, paper knife and shave down pressure line round.
4, tooth grinding heat treated alloy steel slotted knife, a width of 5-7 mm.
5, heat treated alloy steel grinding trimming knife, sharp knife, high precision.
四、圓模部(可選)
、可選用手動或式操作。
2、床臺升降由強力鏈條帶動。
3、堆疊高度為1600mm。
4、平面皺紋爬坡皮帶,防止紙板下滑。
5、氣壓動作接紙擋板,在紙板堆積到預訂高度時接紙托板可伸出,托住紙板。
IIV. Stacking unit (optional)
1, the choice of manual or operation.
2 bed units lift driven by strong chain.
3, the stack height is 1600mm.
4, flat wrinkles climbing belt, to prevent the cardboard decline.
5, when the pressure action bin baffle stacked in cardboard tray connected to the book highly extendable, hold the cardboard.
六、傳送齒輪
1)、運轉順暢、噪音小、硬度HRC50-55,壽命長,磨損小,可以長期**印刷套色精度不變。
2)、相位齒輪采用45號鋼,經調質、高頻淬火、滾齒精加工,硬度HRC50-55.Six gear transmission
1), smooth operation, low noise, hardness HRC50-55, long life, wear a small, long-term guarantee the accuracy of printed chromatic unchanged.
2), the phase gear using 45 steel, quenched and tempered, high-frequency hardening, hobbing finishing, hardness HRC50-55.
七、潤滑
1)、各單元采用齒輪油泵上油,實現循環噴淋式潤滑。
2)、各油箱裝有儲油
八、主要技術參數
1、機器較高機械速度:100(張/分鐘),工作速度80(張/分鐘)
2、較大進紙尺寸:1200mm×2200mm
3、較小進紙尺寸:350mm(滿版)×800mm
4、較大印刷面積:1450mm×2200mm
5、標準印版厚度:4mm或6mm
6、印刷精度:≤±0.75mm(四色)
7, lubrication
1), each unit with gear pump oil to achieve circular spray lubrication.
2), with the storage tank
Eight, the main technical parameters
1, the machine maximum mechanical speed: 100 (pcs / min)
2, the maximum feed size: 1400mm× 2500mm
3, the minimum feed size: 350mm (full version)× 800mm
4, the maximum printing area: 1450mm× 2250mm
5, the standard plate thickness: 4mm or 6mm
6, the printing precision:≤ ± 0.75mm (four-color)
規格 : 單色雙色三色四色印刷機 ;
售后服務 : 一年 ;
產品類型 : 全新 ;
外形尺寸 : 9500*5500*1650(mm) ;
重量 : 8500(kg) ;
套印精度± : 2(mm) ;
膠板輥筒周長 : 1200(mm) ;
卷材較大直徑 : 405(mm) ;
印刷品長度范圍 : 350-2200(mm) ;
較大印刷寬度 : 2200(mm) ;
較大印料寬度 : 2500(mm) ;
印刷速度 : 100(m/min) ;
型號 : 2500 ;
** : 新華振 ;
適用材質 : 紙質 ;
適用對象 : 紙質包裝 ;
操作方式 : 全自動 ;
印刷顏色 : 四色 ;
柔印機類型 : 機組式 ;
加工定制 : 是 ;