【蘭天】聚合氯化鋁pac用于工業廢水、污水處理
【簡介】
聚合氯化鋁是一種無機高分子混凝劑,由于氫氧根離子的架橋作用和多價陰離子的聚合作用而生成分子量較大、電荷較高的無機高分子水處理藥劑。
聚合氯化鋁性能:
1、凈化后的水質優于硫酸鋁混凝劑,凈水成本與之相比低15-30%。
2、絮凝體形成快、沉降速度快,比硫酸鋁等傳統產品處理能力大。
3、消耗水中堿度低于各種無機混凝劑,因而可不投或少投堿劑。
4、適應的源水PH5.0-9.0范圍均可凝聚。
5、腐蝕性小,操作條件好。
6、溶解性優于硫酸鋁。
7、處理水中鹽分增加少,有利于離子交換處理和高純制水。
8、對源水溫度的適應性優于硫酸鋁等無機混凝劑。
【應用】
1、 凈水處理:生活用水、工業用水;
2、 城市污水處理;
3、 工業廢水、污水、污泥的處理及污水中某些渣質回收等;
4、 對某些處理難度大的工業污水,以PAC為母體,摻入其他藥劑,調配成復合PAC,處理污水能得到驚喜的效果。
【指標】
指標名稱
產品等級
飲用水(一級)
非飲用水(二級)
AL2O3
≥28-31
≥27-29
鹽基度%
50-95
60-100
PH值
3.5-5
3.5-5
水不溶物含量
≤0.5-1.5
≤1.5-3
鉛Pb
PPm≤3
砷As
PPm≤0.5
鐵Fe
PPm≤0.3
汞Hg
PPm≤0.2
【包裝】
本產品為編織袋包裝,聚乙烯塑料薄膜,每袋凈重25公斤,產品在貯存時應放置于陰涼干燥處,不得與有毒、有害、有異味的產品混合存放。
【 Abstract 】
Polyaluminium chloride is a kind of inorganic polymer coagulant, due to the effect of bridge of the hydroxyl ions and polyvalent anions polymerization and generate larger molecular weight and charge higher inorganic polymer water treatment agent.
Polyaluminium chloride performance:
1, after purification, the water quality is better than that of aluminum sulfate coagulant, water purification low cost compared with 15-30%.
2, fast flocculation body formation, sedimentation speed, bigger than aluminum sulfate and other traditional products processing capacity.
3, consume water alkalinity under all kinds of inorganic coagulant, so don\"t throw or less alkali agent.
4, to adapt to the source water PH5.0-9.0 range can be condensed.
Small five, corrosive, good operation condition.
6, solubility is better than that of aluminum sulfate.
7, less water saltier, benefits and high purity water ion exchange treatment.
【 Application 】
1, water purification treatment: domestic water, industrial water;
2, urban sewage treatment;
3, industrial wastewater, sewage and sludge treatment and some slag quality in sewage recycling, etc.;
4, for some difficult processing of industrial wastewater and PAC as a matrix and mixed with other reagents, allocate composite PAC, sewage can get surprise effect.
【 Packing 】
This product is a woven bag packing, polyethylene plastic film, bag of 25 kg net each, products in storage should be placed in a cool and dry place, not the product mix and poisonous, harmful, have peculiar smell.
平泉縣蘭天活性炭廠是椰殼活性炭、果殼活性炭、木質粉狀活性炭、煤質粉狀活性炭、柱狀活性炭等產品專業生產加工的公司,擁有完整、科學的質量管理體系。平泉縣蘭天活性炭廠的誠信、實力和產品質量獲得業界的認可。歡迎各界朋友蒞臨參觀、指導和業務洽談。
Pingquan County Lantian activated carbon factory is coconut shell activated carbon, nut shell activated carbon, wood powder activated carbon, coal powder activated carbon, columnar activated carbon products, professional production and processing companies, has a complete and scientific quality management system. Pingquan County, LAN day active carbon factory integrity, strength and product quality is recognized by the industry. Welcome all friends to visit, guidance and business negotiation.
廠名:平泉縣蘭天活性炭廠
地址:中國 河北 平泉縣 平泉鎮紅花溝村
聯系人: 劉敏
手機:
QQ:2259151836
郵箱:2259151836@
網址
Contact:
Plant Name: Pingluo County Lantian Activated Carbon Factory.
Address: Honghuagou vilage,Pingquan town,Chengde Pingquan City, Hebei Province, China
Contact:Min Liu
Mobile:
Q Q: 2259151836
E-mail : 2259151836@
Homepage
目數 80目 名稱 聚合氯化鋁 型號 LT-PAC 品牌 蘭天 化學成份 Al203 外觀 黃色片狀 有效物質含量 28-30(%) 含量 28-30(%) 包裝規格 25KG編織袋 PH值使用范圍 7-9 執行質量標準 5214-585 CAS 1327-41-9